Skip to main content

Can we help? Give us a call on 03452 505502

Product Description

This unique shaped bench offers you plenty of shade and shelter. It is ideally designed to be placed against a wall, fence or as a stand-alone picnic bench. This means that this specially shaped seat can fit into many different alcoves of space in your garden when the available space in your garden might be a crucial factor

By mounting two pressure treated laminated timber circles opposite each other we have created a cylinder. An 800mm x 1200mm table was then fixed into the centre of the cylinder with two wooden seating sections either side. This leaves you with ample room for six people to be seated within. We have assembled this cylinder Wheel Bench using our signature parts of stainless steel, polycarbonate and timber.

This unique shaped bench offers you plenty of shade and shelter. It is ideally designed to be placed against a wall, fence or as a stand alone picnic bench. This means that this specially shaped seat can fit into many different alcoves of space in your garden when the available space in your garden might be a crucial factor.

Freedom to adapt... By placing two or more wheel benchs inline and adding a roof between each unit, we can create a multitude of different sized seating areas. This would be ideal for bars, restaurants and picnic areas and would offer many different ways to use the Wheel Bench in any outdoor area.

All the parts of the Wheel Bench are manufactured from materials ideally suited to the outdoors. For extra comfort the Wheel Bench comes supplied with seat pads in a choice of 3 different colours; charcoal, green and burgundy.

  • Dimensions: Height 218 x Width 220 x Depth 135cm
  • Base Area: 170cm x 135cm
  • Stainless steel roof to offer shade and reflect heat
  • Four laminated treated sustainable spruce timber arcs
  • Luxurious water resistant interior
  • Seating capacity for up to six guests
  • Fitted with removable table top
  • A foot print of no more than a standard garden patio set.

Installation - An area of 230cm x 145cm is required for the Wheel Bench to be installed. A hard base of no less than 175cm x 140cm is preferred to build your bench onto. The Wheel Bench should be installed onto an area of flat level ground.

Ground Preparation - If you are preparing new concrete or paving area for your Wheel Bench, we recommend on an overall depth of 30cm allowing 7 days for the ground to settle prior to the arrival of our fitting team.

Delivery & Refunds

The delivery cost of your order depends on the size of the item you are ordering. 

A product that can be delivered by one person, is standard delivery and costs £5.95. This is is free if you spend £60 or more. Delivery will take between 2 - 3  working days for in-stock items. 

A two person delivery is required for furniture, appliances and items over 30kgs. This costs £25, or is free if you spend £2999 or more. Delivery will take between 5 - 10  working days for in-stock items.  For items that are available to order, the delivery timescales will be confirmed in the checkout. 

Deliveries to some remote postcodes are possible, and carry an additional premium delivery charge. This will be charged in checkout, but please contact us if you have any questions. 

Click and Collect is available on in-stock items from our Grantham site; NG32 2AB. This will be offered in the checkout for small items, but please contact us if you require click and collect on Furniture. 

Please be aware that we do not offer free returns, so unless there is a fault with your item, then you will be required to cover the cost of returning it to us, or for us to collect the item.

Please be aware of the order cancellation policy attached to furniture products, and in particular, items that are configured to your choice. 

Recently viewed

Ornate Garden The Wheel BenchOrnate Garden The Wheel Bench